Continuing with the Victorianna’s spiral staircase — I wasn’t happy with how the stain turned out on the top step, so I painted it to match the landing. I filled in the laser cut part with wood filler. That piece needed to be “bad side up” for it to face the right direction, so the […]
Month: October 2017
The cupola on the Victorianna’s right-hand tower started out as a 1:48 scale gazebo. But because there’s no separation between the cupola and the tower room below, I wanted the cupola to be enclosed rather than “open air” like a gazebo. The bottom level of the towers has 1:12 corner blocks underneath the windows. They […]
I’ve finally reached the point on the Victorianna where I can glue on the front roof pieces. Yay, progress! My plan was to add fishscale shingles to the top portions of the towers. I got these from Alpha Stamps. I don’t know why, but even though it looked great in my head, I hated this […]
The back-to-back Victorianna has two towers, which I enclosed with French doors to turn into little rooms. The one in the master bedroom will be a small office / writing room. The other tower is attached to the nursery, and I couldn’t think of anything that a baby would need in an enclosed room besides […]