The windows and door I’m using for my 1:24 scale Craftsman bungalow vignette are Real Good Toys components that I bought off eBay. I’ve never seen these available for sale individually, but they match the components in the (now discontinued) East Side Townhouse as well as the Queen Anne (which is only available in 1:12 […]
Tag: Half scale (Page 3 of 21)
The theme for this year’s half scale swap through the Half Scale Minis Group was Antiques, and my contribution was a checker board with checkers in a cigar box. As usual, I put these together over the holidays and took pictures then, but I didn’t write anything down, so let’s see how much I can […]
Moving right along on the Craftsman bungalow, the triangular front of the porch roof doesn’t fit snugly under the roof pieces. I could resolve this by adjusting the left side of the roof (which isn’t glued in yet) to meet the angle of the triangle, but then the roof pieces wouldn’t meet up at the […]
Last week I posted about wallpaper and wainscot in the Craftsman bungalow. I’ve been working on the roof and shingles in parallel. The last thing I did before putting the bungalow aside for a year was to glue on the roof. At the time, it looked like this. And this is what I’m working toward. […]
More than a year ago (ouch!), I put the Craftsman bungalow vignette aside because I didn’t have the right wallpaper. When I left off, I had sided and painted the exterior. And I made a nice hardwood floor inside. I also glued on the roof, but I’ll save that for a later post. Before gluing […]
As I mentioned at the end of my last post, I was mostly happy with how the Cassidy Creations Federal fireplace wall turned out, but there were three things I wanted to fix: add more doorknobs so each cabinet door has one, straighten the hinge on the bottom left small door, and add bricks to […]
With the fireplace part of the Federal fireplace wall kit mostly done, I hinged the doors. I’d been putting this off for a while since hinges are intimidating (not to mention twelve of them!), and the hinges that came wit this kit were extra daunting since the hinges themselves had to be assembled. The kit […]
Continuing with the very complicated Cassidy Creations Federal fireplace wall kit, once the front facade and the back structure were completed, I moved on to the fireplace. The first step was to assemble three pieces to make the back of the fireplace. These pieces had mitered edges to meet up at an angle. The kit […]
Last month I posted about the Bauder Pine Mansard Victorian, which I’m planning to furnish with lots of Cassidy Creations kits. Right after that, I got to work on the Cassidy Creations Federal fireplace wall, and I’ve been working on it ever since. This is a complicated kit, and probably one I should have worked […]
I’m working on the Cassidy Creations Federal fireplace wall, a very complex kit that has taken three weekends so far and *might* be done tomorrow… but might not. I know, I know, you’re on the edge of your seat! Here’s a quick post to tide you over. Last week I bought a lot of half […]
Warning: long post incoming! I recently bought this 1:24 scale Bauder-Pine shell off eBay. I think this house was simply known as the Victorian, but I’m dubbing it the Mansard Victorian. I’d seen this house once before when someone posted about it on the Greenleaf forum. The side additions are not attached, and I’m going […]
Work has stalled on the Turret House since I last posted about it in October. That’s partly because we had a ginormous storm at the end of October and my workshop flooded. I didn’t take a “before” picture (since I was frantically moving things out of the way before they got wet), but here’s the […]
Swap time is rolling around on the Half Scale Minis Group and I have an idea I’m excited about, but of course I won’t be able to talk about it for a few months. While I was thinking about this I realized that I posted about the basket I made for the last swap, but […]
Continuing with the floral trim, I wanted to add it to the bump-out on the side of the house. I did this on my original Queen Anne Rowhouse, but painted the roof instead of shingling it. This time I decided to shingle the roof. Not my best work. The problem here was that I measured […]
I like how resin trims and appliques can be used on dollhouses to emulate the accents on Queen Anne Victorians. These are the Four Seasons houses, located at Waller and Masonic in San Francisco (image credit Wikipedia). I tried to do something similar on my original Queen Anne Rowhouse, using resin trims from Unique Miniatures […]
Quick post today! I’ll have a bigger one soon about the trim I’ve been working on for weeks, but first I want to revisit the brackets and window pediments I left off with last time. In order to make this window pediment fit under the bracket, I initially tried cutting the corner off both parts […]
People keep telling me they like my blog because I show the mistakes I make and how I fix them. I don’t do this on purpose! But it’s true that sometimes (okay, a lot of times) I go down a rabbit hole, and then I can’t stop myself from meticulously documenting what went wrong. This […]
I had some trouble with my website recently but I think it’s fixed…? Also it’s possible that a setting in my graphics program got messed up and my pictures have been bigger than they should be lately. If you’re having trouble with slow load times, please let me know in the comments! Working on the […]
About a year ago I posted about the Bauder Pine attic roombox inside a trunk. Recently I spotted another one on eBay, but this was a Spanish style. I was going to bid on it, but I always wait until the very end of the auction, and this time I forgot that I had to […]
When I bought the Turret House, it was already shingled except for the left side of the small gable. The builder had marked off rows 3/8″ apart and left instructions to “leave space” at the left side and overhang the shingles by 1/8″ at the right side. The house came with a spacer for the […]
Emily is a freelance writer, miniaturist, and adventure game enthusiast.
If you have comments about this site or would like to get in touch regarding a freelance opportunity, please write to hello -at- emilymorganti.com.
