{"id":10264,"date":"2016-06-13T18:50:46","date_gmt":"2016-06-14T01:50:46","guid":{"rendered":"http:\/\/www.emilymorganti.com\/blog\/?p=10264"},"modified":"2016-06-13T18:50:46","modified_gmt":"2016-06-14T01:50:46","slug":"bill-lankford-cottages-adding-wood-filler-texture","status":"publish","type":"post","link":"https:\/\/www.emilymorganti.com\/blog\/?p=10264","title":{"rendered":"Bill Lankford cottages &#8211; adding wood filler texture"},"content":{"rendered":"<p>I don&#8217;t know what materials were originally used to create the texture on the outside of the Bill Lankford cottages. Possibly spackling compound. In the past I&#8217;ve used watered-down wood filler for a stucco effect (<a href=\"\/blog\/?p=3545\" target=\"new\">Rosedale<\/a>, <a href=\"\/blog\/?p=7420\" target=\"new\">Artist&#8217;s Cottage<\/a>) and since I&#8217;m more experienced with that than spackle, I decided to do something similar to add texture to the cottage walls.<\/p>\n<p>My wood filler was almost empty, so I bought a new one. Previously I had been using Elmer&#8217;s brand and this is Dap &#8220;plastic wood&#8221; (Home Depot didn&#8217;t have Elmer&#8217;s). The consistency is different, almost like thick tahini sauce.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture01.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I mixed it up with the rest of the Elmer&#8217;s (the yellower, crumblier stuff).<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture02.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>After adding water and stirring, they mixed together fine. It was a little thin &#8212; maybe I should have added more of the Dap stuff &#8212; but I just wanted some texture, not stucco necessarily, so I thought thin would be okay. <\/p>\n<p>Before I started painting it on I put tape over the windows, leaving a bit around the edges to account for the trim, which I thought would be easier to glue onto flat wood than textured.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture03.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I forgot to take a picture at this point in the process, but I spread this stuff on the walls with a sponge brush, swirling and dabbing to create texture. When some of it had dried a bit I went back and dabbed some more. Then I let it dry a few hours, peeled off the masking tape, and started the first coat of paint.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture05.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Here it is completely painted. I was using a sample jar of Behr &#8220;Sandstone Cove.&#8221;<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture06.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>The masking tape didn&#8217;t work out quite how I&#8217;d hoped. I think this happened on the Rosedale, too &#8212; the lines left by the edges of the tape are much too obvious, especially since I wasn&#8217;t precise about how much trim area got masked off. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture08.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I did another round with the wood filler, being super careful not to get it on the windows. I also touched up some other areas that hadn&#8217;t come out as textured as I wanted.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture09.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Much better! And because this is a thin layer and not as bumpy as the stucco, I don&#8217;t think gluing trim over it will be a problem.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture22.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Here&#8217;s the Thatched Cottage with all its walls done.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture20.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p><!--more--><\/p>\n<p>On to the Tudor. I did the walls the same way, using the sponge brush to add texture. I already punched out the windows on this house (to be re-glued in later) so I didn&#8217;t have to tape them off.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture04.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>The Tudor needed some external repairs as well. One side of the dormer was unpainted.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/tudor-unpainted-side.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I removed the trim piece from the side, put down masking tape, and added texture as best I could without making a huge mess. <\/p>\n<p>Also, notice how dusty the shingles were in the picture above?! While the wood filler on the dormer was drying I took a damp paper towel to the whole roof. Here you can see it with the bottom and right side wiped, and the left side not yet wiped. Eventually I&#8217;ll either repaint these or add washes, but for now I&#8217;m just glad to get that dust off!<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/shingles01.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Here&#8217;s the side of the dormer textured and painted. It&#8217;s not nearly as thick\/bumpy as the rest of the house, but it&#8217;s the best I could do without making a mess on the shingles and chimney.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture07.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>This house has a few brick patches that show through the stucco. They haven&#8217;t been very well blended in. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture10.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I added wood filler around the brick patches to cover up the straight lines and corners.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture11.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I noticed something weird about the opening for the bay window. A piece of strip wood was glued to one side of the opening at some point before the stucco was applied &#8211; you can see it from the inside.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture12.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>On the outside it&#8217;s covered up with stucco.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture13.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Not only does this make the opening lopsided, but there are still gaps on each side of the window (which is why I pulled it off in the first place). Comparing it to pictures, I don&#8217;t think this is the original bay window&#8230; either that or it was built wrong. It just doesn&#8217;t fit the opening. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture15.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>So, I ripped off the piece of strip wood and will have to start from scratch on the bay window when the time comes.<\/p>\n<p>Here&#8217;s how the interior looks after the first coat of Sandstone Cove. It was all going so well, until I turned the house around&#8230;<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture19.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I don&#8217;t know why I thought this paint color was a good match for what was already there. It isn&#8217;t even close, as you can see on the edge and around the brick where I&#8217;d touched up over the wood filler.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture16.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>&#8220;I know,&#8221; I thought, &#8220;I&#8217;ll just repaint the whole thing with Sandstone Cove. What could go wrong?&#8221;<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture18.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Ahem. Lighting and the flash and the camera&#8217;s automatic color correction make it hard to see the nuance, but once I&#8217;d gone over the whole exterior with Sandstone Cove it looked AWFUL. Like dirty snow.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture23.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>In a fit of rage I went over the whole front again, this time with bright white. In this picture the left side has been re-painted and the right is still Sandstone Cove &#8212; see how dingy that looked?<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture29.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>Of course, since there&#8217;s no real separation between the back and the front, now I had to redo the inside, too. I can&#8217;t believe the Sandstone Cove was so gray. It really didn&#8217;t look like that as I was painting it. (Out of laziness, I&#8217;ve decided to leave the Sandstone Cove inside the Thatched Cottage, since you don&#8217;t really see the outside and inside &#8220;next to each other&#8221; in that house.) <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture30.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>And here&#8217;s the Tudor with its new paint job. When the flash goes off it looks <a href=\"\/dollhouse\/lankford\/texture33.jpg\" target=\"new\">a tad too white<\/a>, but I think I&#8217;ll blame that on the camera. I&#8217;m not painting it again!<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture31.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I need to do a few touch-ups inside &#8212; those holes where the dormer roof meets the wall on the left side, and around the insides of the window holes that I didn&#8217;t realize will show once the resin windows are glued back in &#8212; but this is done for now.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/lankford\/texture34.jpg\" style=\"margin-bottom:15px; margin-top:15px\"><\/p>\n<p>I haven&#8217;t decided yet if I&#8217;m going to do egg carton stone on the first floor, or hardwoods. If I do stone I&#8217;ll wrap it around the front edge, but if I do hardwoods I&#8217;ll go back and texture and paint the edge like it is upstairs.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I don&#8217;t know what materials were originally used to create the texture on the outside of the Bill Lankford cottages. Possibly spackling compound. In the past I&#8217;ve used watered-down wood filler for a stucco effect (Rosedale, Artist&#8217;s Cottage) and since I&#8217;m more experienced with that than spackle, I decided to do something similar to add [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[77,19,79,78],"class_list":["post-10264","post","type-post","status-publish","format-standard","hentry","category-dollhouses","tag-bill-lankford","tag-half-scale","tag-thatched-cottage","tag-tudor-cottage","post-preview"],"_links":{"self":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/10264","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=10264"}],"version-history":[{"count":22,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/10264\/revisions"}],"predecessor-version":[{"id":10297,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/10264\/revisions\/10297"}],"wp:attachment":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=10264"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=10264"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=10264"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}