{"id":4935,"date":"2012-08-12T21:43:26","date_gmt":"2012-08-13T04:43:26","guid":{"rendered":"http:\/\/www.emilymorganti.com\/blog\/?p=4935"},"modified":"2018-09-10T16:17:51","modified_gmt":"2018-09-10T23:17:51","slug":"little-house-cabin-shingles","status":"publish","type":"post","link":"https:\/\/www.emilymorganti.com\/blog\/?p=4935","title":{"rendered":"Little House Cabin &#8211; shingles"},"content":{"rendered":"<p>Shingling was the last big job to do on the cabin. When I <a href=\"http:\/\/www.emilymorganti.com\/blog\/?p=4910\" \"_blank\">glued the skinny sticks to the inside of the roof<\/a>, something got off kilter so the roof wouldn&#8217;t glue on straight. Oops.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin71.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>The porch roof is supposed to attach to the front of the roof at a 45-degree angle. I glued a shim to the right side of it to compensate for the crooked roof.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin72.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>The shim made it so I could attach the porch roof more or less straight. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin73.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>I glopped it up with plenty of glue. Also, I decided to use only three of the four porch posts since with four, I couldn&#8217;t space them evenly without blocking the door. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin74.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p><!--more-->Here&#8217;s the messy glue job from the side. I&#8217;m planning to cover the exposed edges of plywood with trim when this is all done, so that will hide the gap where the roof pieces don&#8217;t quite meet up.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin75.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>And here it is once the glue dried. Not entirely straight, but much better than it would have been if I&#8217;d glued the porch roof on like I was supposed to. At the top, I figured I could fudge the shingles to make the roof line look (mostly) straight. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin76.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>I keep reminding myself that this is a log cabin in the 1800s in the middle of the woods. It&#8217;s not like they had building codes!<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin77.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>I spaced the rows of shingles 1\/4&#8243; apart, using my silver pen to draw on the stained wood. In the past when I&#8217;ve tried to draw all the lines in the beginning, I usually get messed up halfway up the roof. So instead I glue on a row, and then measure 1\/4&#8243; up from that to do the next row. It&#8217;s not a perfect system but maybe a bit of unevenness makes it look more authentically rustic.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin78.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>When I got to the top row, I kept the shingles along the edge of the original porch roof piece. <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin79.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Then with the next row, I covered up the gap where the roof pieces didn&#8217;t quite meet.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin82.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>About five rows up the main roof piece, it became apparent that I didn&#8217;t have enough shingles left for the whole roof. I sort of suspected this when I started, but I was in denial. I needed about fourteen rows&#8217; worth to finish the front of the roof (that&#8217;s not even including the back!) and only had enough shingles for nine of them.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin84.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Luckily I had some half scale cedar shake shingles leftover from another project. They&#8217;re close, but not exactly the same. (On the left below is one of the new shingles, next to one from the kit.) The replacement shingles are a little bit shorter and thicker. They also have a greater color variation than the kit shingles, which were all fairly uniform. But I didn&#8217;t have much choice&#8230;<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin85.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>I counted out enough of the new shingles for the remaining roof rows, and mixed them all together so the transition from one type to the other would be less obvious.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin86.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Since the new shingles are a tad shorter, I tried to match those up at the bottom rather than lining them up with the guide line at the top.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin87.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>The thickness of the new shingles made the roof kind of lumpy, but it works much better in a rustic cabin than it would in a frilly Victorian! <\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin88.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>As expected, at the top my spacing was off due to the crookedness of the roof.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin89.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>I was able to hide this (more or less) by making the shingles on the left overshoot the top of the roof a little bit. I&#8217;m also planning to add ridge trim, which should mask any weirdness where the shingles meet at the top;.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin90.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>And here&#8217;s the shingling job on the back. I got a bit sloppy by the end and the spacing on these rows is not the best. Also it&#8217;s a little weird around the chimney. Eh, whatever. This is the 1800s, right?!<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin91.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Here&#8217;s how it looks at the roof peak. I&#8217;m planning to cover this seam with trim.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin95.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Not bad considering I almost had a shingle emergency midway through! I&#8217;m still planning to do some weathering to these to make them more gray, like the rest of the house. They&#8217;re stained with the same ebony stain as all the rest of the wood, but the (cedar?) shingle material causes them to look much more brown than everything else.<\/p>\n<p><img decoding=\"async\" src=\"\/dollhouse\/little-house-cabin\/cabin93.jpg\" style=\"margin-top:15px; margin-bottom:15px\"><\/p>\n<p>Next comes the fun part&mdash;decorating! I have several furniture kits to put together and am going to try building a bed and trundle bed from scratch by adapting 1:12 patterns from <a href=\"http:\/\/www.amazon.com\/Shaker-furnishings-houses-miniature-rooms\/dp\/B0006YXHB4\" target=\"_blank\">this booklet<\/a>. Pictures to follow!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Shingling was the last big job to do on the cabin. When I glued the skinny sticks to the inside of the roof, something got off kilter so the roof wouldn&#8217;t glue on straight. Oops. The porch roof is supposed to attach to the front of the roof at a 45-degree angle. I glued a [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[19,32,87],"class_list":["post-4935","post","type-post","status-publish","format-standard","hentry","category-dollhouses","tag-half-scale","tag-little-house-in-the-big-woods-cabin","tag-shingles","post-preview"],"_links":{"self":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/4935","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=4935"}],"version-history":[{"count":13,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/4935\/revisions"}],"predecessor-version":[{"id":4976,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/4935\/revisions\/4976"}],"wp:attachment":[{"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=4935"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=4935"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.emilymorganti.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=4935"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}